Sedimentary evolution of Lake Van (Eastern Turkey) reconstructed from high-resolution seismic investigations

This paper presents results of a multi-channel seismic reflection survey at Lake Van and provides constraints on the sedimentary evolution of the lake. The geophysical data of the lake confirm the existence of three physiographic provinces: a shelf, a slope, and a deep, relatively flat basin. The most prominent features identified on the shelf and slope are clinoforms, submerged channels, as well as closely spaced lake floor depressions, reflecting a highly variable lake-level history. The morphological depressions are interpreted as resulting from subaquatic erosion by channelized, sediment-laden currents into horizontally bedded fan sediments. Submerged channels on the eastern shelf are interpreted as meandering-slope channels, probably as a consequence of a lake-level fall that exposed the shelf area. Clinoforms on the Eastern fan may represent relict deltas formed during stationary or slightly rising lake-level intervals. Merging subsurface imaging interpretation with morphological studies of exposed sediments reveals lake-level fluctuations of several hundreds of meters during the past ca. ~550 ka. The lake has three prominent basins (Tatvan, Deveboynu, and the Northern basin) separated by basement ridges (e.g., the Northern ridge). The seismic units in the Tatvan and Northern basins are dominated by alternations of well-stratified and chaotic reflections, while the Deveboynu basin subsurface consists mainly of chaotic units. The chaotic seismic facies are interpreted as mass-flow deposits, probably triggered by earthquakes and/or rapid lake-level fluctuations. The moderate-to-high-amplitude, well-stratified facies seen in the deeper parts of the basins are interpreted as lacustrine deposits intercalated with tephra layers. The occurrence of a clinoform in the deepest part of the lake suggests a major flooding stage of Lake Van more than ~400 ka ago. Seismic profiles from the deepest part of the lake basin show remarkably uniform and continuous stratigraphic units without any major erosional feature following the flooding event, indicating that the lake was never completely dry afterward and therefore significantly older than previously suggested.     

Ground water radon anomalies in Bodrum Peninsula

Bodrum Peninsula is located between Hellenic Trench in the west and Gökova Fault Zone in the east which is affected by hundreds of earthquakes every year. Because of its active environment is allowed to monitor tracers/precursors continuously to analyse natural processes. This study focused on the determination of ground water radon (²²²Rn) concentrations in the Bodrum Peninsula in terms of seismic activities. Radon levels of ten ground water wells were measured periodically throughout the peninsula and these wells were divided into two groups according to the number of earthquakes they are exposed. Radon variations in second group stations are fairly significant as a result of high number of earthquakes. In these stations, radon continuously increased before the seismic storm and then decreased step by step. The results indicated that radon variations in ground waters of Bodrum Peninsula can be a good indicator for seismic storms instead of one specific event.     

Geotechnical investigations and remediation design for failure of tunnel portal section: a case study in northern Turkey

Mass movements are very common problems in the eastern Black Sea region of Turkey due to its climate conditions, geological, and geomorphological characteristics. High slope angle, weathering, dense rainfalls, and anthropogenic impacts are generally reported as the most important triggering factors in the region. Following the portal slope excavations in the entrance section of Cankurtaran tunnel, located in the region, where the highly weathered andesitic tuff crops out, a circular toe failure occurred. The main target of the present study is to investigate the causes and occurrence mechanism of this failure and to determine the feasible remedial measures against it using finite element method (FEM) in four stages. These stages are slope stability analyses for pre- and postexcavation cases, and remediation design assessments for slope and tunnel. The results of the FEM-SSR analyses indicated that the insufficient initial support design and weathering of the andesitic tuffs are the main factors that caused the portal failure. After installing a rock retaining wall with jet grout columns and reinforced slope benching applications, the factor of safety increased from 0.83 to 2.80. In addition to slope stability evaluation, the Rock Mass Rating (RMR), Rock Mass Quality (Q) and New Austrian Tunneling Method (NATM) systems were also utilized as empirical methods to characterize the tunnel ground and to determine the tunnel support design. The performance of the suggested empirical support design, induced stress distributions and deformations were analyzed by means of numerical modelling. Finally, it was concluded that the recommended stabilization technique was essential for the dynamic long-term stability and prevents the effects of failure. Additionally, the FEM method gives useful and reasonably reliable results in evaluating the stability of cut slopes and tunnels excavated both in continuous and discontinuous rock masses.     

From transpression to transtension: changes in morphology and structure around a bend on the North Anatolian Fault in the Marmara region

The east–west-trending North Anatolian Fault makes a 17° bend in the western Marmara region from a mildly transpressional segment to a strongly transtensional one. We have studied the changes in the morphology and structure around this fault bend using digital elevation models, field structural geology, and multi-channel seismic reflection profiles. The transpression is reflected in the morphology as the Ganos Mountain, a major zone of uplift, 10 km wide and 35 km long, elongated parallel to the transpressional Ganos Fault segment west of this bend. Flat-lying Eocene turbidites of the Thrace Basin are folded upwards against this Ganos Fault, forming a monocline with the Ganos Mountain at its steep southern limb and the flat-lying hinterland farther north at the flat limb. The sharp northern margin of the Ganos Mountain coincides closely with the monoclinal axis. The strike of the bedding, and the minor and regional fold axes in the Eocene turbidites in Ganos Mountain are parallel to the trace of the Ganos Fault indicating that these structures, as well as the morphology, have formed by shortening perpendicular to the North Anatolian Fault. The monoclinal structure of Ganos Mountain implies that the North Anatolian Fault dips under this mountain at 50°, and this ramp terminates at a decollement at a calculated depth of 8 km. East of this fault bend, the northward dip of the North Anatolian Fault is maintained but it has a normal dip-slip component. This has led to the formation of an asymmetric half-graben, the Tekirdağ Basin in the western Sea of Marmara, containing a thickness of up to 2.5 km of Pliocene to Recent syn-transform sediments. As the Ganos uplift is translated eastwards from the transpressional to the transtensional zone, it undergoes subsidence by southward tilting. However, a morphological relic of the Ganos uplift is maintained as the steep northern submarine slope of the Tekirdağ Basin. The minimum of 3.5 km of fault-normal shortening in the Ganos Mountain, and the minimum of 40 km eastward translation of the Ganos uplift indicate that the present fault geometry has existed for at least the last 2 million years.     

Stratigraphy and tectono-sedimentary evolution of the Upper Cretaceous–Tertiary sequence in the southern part of the Malatya Basin, East Anatolia, Turkey

The Malatya Basin is situated on the southern Taurus-Anatolian Platform. The southern part of the basin contains a sedimentary sequence which can be divided into four main units, each separated by an unconformity. From base to top, these are: (1) Permo-Carboniferous; (2) Upper Cretaceous–Lower Paleocene, (3) Middle-Upper Eocene and (4) Upper Miocene. The Upper Cretaceous–Tertiary sedimentary sequence resting on basement rocks is up to 700 m thick.The Permo-Carboniferous basement consist of dolomites and recrystallized limestones. The Upper Cretaceous–Lower Paleocene transgressive–regressive sequence shows a transition from terrestrial environments, via lagoonal to shallow-marine limestones to deep marine turbiditic sediments, followed upwards by shallow marine cherty limestones. The marine sediments contain planktic and benthic foraminifers indicating an upper Campanian, Maastrichtian and Danian age. The Middle-Upper Eocene is a transgressive–regressive sequence represented by terrestrial and lagoonal clastics, shallow-marine limestones and deep marine turbidites. The planktic and benthic foraminifers in the marine sediments indicate a Middle-Upper Eocene age. The upper Miocene sequence consists of a reddish-brown conglomerate–sandstone–mudstone alternation of alluvial and fluvial facies.During Late Cretaceous–Early Paleocene times, the Gündüzbey Group was deposited in the southern part of a fore-arc basin, simultaneously with volcanics belonging to the Yüksekova Group. During Middle-Late Eocene times, the Yeşilyurt Group was deposited in the northern part of the Maden Basin and the Helete volcanic arc. The Middle-Upper Eocene Malatya Basin was formed due to block faulting at the beginning of the Middle Eocene time. During the Late Paleocene–Early Eocene, and at the end of the Eocene, the study areas became continental due to the southward advance of nappe structures.The rock sequences in the southern part of the Malatya Basin may be divided into four tectonic units, from base to top: the lower allochthon, the upper allochthon, the parautochthon and autochthonous rock units.     

Detecting of Lithological Units by Using Terrestrial Spectral Data and Remote Sensing Image

The objective of the study was to carry out an automatic classification of the lithological units of interest using the integration of remote sensing image, in which various objects are spread on, and terrestrial spectral measurement data. Only endmembers of interest are classified using spectral classification methods such as Spectral Angle Mapper. Following the identification of the types of rock and minerals, integration of remote sensing images and spectral measurement data enable spectral classification. In this study, Short Wave Infrared detector images of Advanced Spaceborne Thermal Emission and Reflection Radiometer satellite and spectroradiometer measurements were used. The study area, Gölova with its geological diversity is located in the Kelkit Valley section of the North Anatolian Fault Zone in Northeast of Turkey. Seventeen rock samples were collected and their coordinates were recorded. The samples were categorized via spectral measurements on their thin sections through petrographic analyses. Marble and Meta lava with different lithological were selected as endmembers. SAM was used as the classification method that enables the analysis of the endmember with the threshold value of 0.009 radian for marble and 0.010 radian for metalava. SAM analysis was compared by visual analysis to principle component analysis, decorrelation stretch, band ratio (R: 4/7, G: 4/1, B (2/3) x (4/3)) and band combination analysis (R: 9, G: 4 and B: 5). This study demonstrates that the SAM method can be successfully used in both the integration of remote sensing image and terrestrial spectral measurement data in lithological classification. Both the endmembers of metalava and marbles were detected in the SAM results at the GPS coordinates noted down whilst collecting the rock samples for accuracy assessment.     

Early Miocene stratigraphy of central west Anatolia,Turkey: implications for the tectonic evolution of the eastern Aegean area

Small‐mammalian faunas enable the discrimination and correlation of uppermost Lower Miocene lacustrine sedimentary units in central western Anatolia. On the basis of sequential stratigraphic relationships, early Early Miocene and latest Early Miocene relative ages are suggested for the older lacustrine mass‐flow deposits and younger paper shale units, respectively, which are devoid of age‐diagnostic fossils. In central western Anatolia, the sequential differences between the uppermost Lower Miocene successions delineate a deformation zone of NE–SW‐trending fault blocks separated by vertical faults. This deformation zone, inherited from Late Oligocene tectonics, underwent an early Early Miocene sinistral transtension leading to pull‐aparts that were emplaced by granitoids. Limited extension caused the late Early Miocene repetitive up‐ and down‐wards motions of the fault blocks, with variable magnitudes. This led to contrasting subsidence histories in the relevant basinal system. During the latest Early Miocene, fault blocks coalesced into a regional body characterized by uniform slow subsidence and non‐extensional deformation facies. The general trend of the above tectonic events can be explained by lateral slab segmentation and progressive asthenospheric wedging, in response to NE‐directed and decelerated palaeosubduction in the Aegean. Copyright © 2007 John Wiley & Sons, Ltd.     

Ovo-testis and disturbed reproductive cycle in the giant abalone, Haliotis madaka: possible linkage with organotin contamination in a site of population decline.

Histological examination of gonads as well as chemical analysis of organotin compounds in tissues of the giant abalone, Haliotis madaka, was conducted to evaluate possible endocrine disruption and to consider the causal factors for the decline of abalone stocks in Japan. Abalone specimens were collected from two different areas, Tsushima as a reference site and Jogashima as a site representative of declining abalone populations, each month from September 1995 to November 1996. Scores were given to the development stages of reproductive cells in the ovary and testis. The degree of sexual maturation was evaluated by calculating the mean value of a histogram of these scores for the reproductive cells of each abalone. The temporal variations in degree of sexual maturation showed that female and male abalone from Tsushima matured synchronously, while those from Jogashima did not. The observed maximum reproductive developmental score in abalone from Jogashima was much lower than that from Tsushima, because immature females were present at the former site throughout the spawing season. Approximately 20% of the abalone from Jogashima were masculinized females with an ovo-testis. The masculinization of female abalone was similar to the imposex, typically induced in other gastropod molluscs by tributyltin (TBT) and triphenyltin (TPhT) from antifouling paints. Concentrations of TBT and TPhT in the muscles of abalone from Jogashima (n = 83) of 4.9 +/- 4.4 ng/g wet wt and 6.3 +/- 6.6 ng/g wet wt, respectively, were significantly higher than those from Tsushima (n = 125) (P < 0.01) of 0.8 +/- 0.8 ng/g wet wt and 0.6 +/- 1.3 ng/g wet wt, respectively. In situ exposure of abalone from Tsushima caged near a dockyard in Jogashima for 7 months (from the immature to the mature stage) resulted in spermatogenesis in the ovary of approximately 90% of females. Endocrine disruption may be caused in the giant abalone by organotin compounds from antifouling paints, which are possibly one of the causal factors for the decline of Japanese abalone stocks.     

The geology and morphology of the Antakya Graben between the Amik Triple Junction and the Cyprus Arc

In southeastern Turkey, the NE-trending Antakya Graben forms an asymmetric depression filled by Pliocene marine siliciclastic sediment, Pleistocene to Recent fluvial terrace sediment, and alluvium. Along the Mediterranean coast of the graben, marine terrace deposits sit at different elevations ranging from 2 to 180 m above present sea level, with ages ranging from MIS 2 to 11. A multisegmented, dominantly sinistral fault lying along the graben may connect the Cyprus Arc in the west to the Amik Triple Junction on the Dead Sea Fault (DSF) in the east. Normal faults, which are younger than the sinistral ones, bound the graben’s southeastern margin. The westward escape of the continental ?skenderun Block, delimited by sinistral fault segments belonging to the DSF in the east and the Eastern Anatolian Fault in the north caused the development of a sinistral transtensional tectonic regime, which has opened the Antakya Graben since the Pliocene. In the later stages of this opening, normal faults developed along the southeastern margin that caused the graben to tilt to the southwest, leading to differential uplift of Mediterranean coastal terraces. Most of these normal faults remain active. In addition to these tectonic movements, Pleistocene sea level changes in the Mediterranean affected the geomorphological evolution of the area.